Glorias Dichroics

One -1- Large Silver Plated Bracelet Blank Form

One (1) larger sized Silver Plated base metal bracelet form / blank. Suitable for mounting all sorts of fun and decorative items including dichroic glass cabochons, buttons, typewriter keys, charms and fimo.

The dappled glue pad creates a seat for the glue which will help secure the glued cabochon and also help prevent loss of your chosen cabochons.

The bracelet form is fitted with a very secure overlocking clasp.

The surfaces of your cabochons and the bracelet pad should preferably meet without gaps.

Glorias Dichroics strongly recommends the use of a high strength, waterproof, epoxy resin adhesive for glueing your chosen cabochons to the bracelet pads. It is adviseable to roughen the surface of the bracelet pads with sand paper before applying the adhesive to ensure good adhesion between your cabochons and the pads.

Approx Size 191 mm long (7.5 inches) with 9 No.13 mm pads.

Copyright © Gloria Minshull 2008 All Rights Reserved

Pack of Three -3- Small 18 Kt Gold Plated Bail

PACK OF THREE (3) AANRAKU Small 18 Kt Gold Plated Bails 6 mm wide by 15 mm long .

Supplied for jewellery makers and beaders to attach to cabochons using high strength, waterproof, epoxy resin glue.

Please note the purchase of bails DOES NOT include fitting the bail to a cabochon.

If you require our bail attachment service please click here.

Pack of Three -3- Large 18 Kt Gold Plated Bail

PACK OF THREE (3) AANRAKU Large 18 Kt Gold Plated Bails 10 mm wide by 25 mm long .

Supplied for jewellery makers and beaders to attach to cabochons using high strength, waterproof epoxy resin glue.

Please note the purchase of this bail DOES NOT include fitting the bail to a cabochon.

If you require our bail attachment service please click here.

Pack of Three -3- Large Sterling Silver Plated Bail

PACK OF THREE (3) AANRAKU Large Sterling Silver Plated BailS 10 mm wide by 25 mm long .

Supplied for jewellery makers and beaders to attach to cabochons using high strength, waterproof epoxy resin glue.

Please note the purchase of bailS DOES NOT include fitting the bail to a cabochon.

If you require our bail attachment service please click here.

Pack of Three -3- Small Sterling Silver Plated Bail

PACK OF THREE (3) AANRAKU Small Sterling Silver Plated Bails 6 mm wide by 15 mm long .

Supplied for jewellery makers and beaders to attach to cabochons using high strength, waterproof, epoxy resin glue.

Please note the purchase of bails DOES NOT include fitting the bail to a cabochon.

If you require our bail attachment service please click here.

One -1- Silver Plated Double Bar Spring Loaded Bangle Blank

One (1) silver plated spring loaded double bar bangle blank with half fixed oval cabochon cup suitable for mounting all sorts of fun and decorative items including dichroic glass cabochons, buttons, typewriter keys, charms and fimo.
This bangle blank has a spring opening (you can see the spring mechanism at the bottom of the bracelet in the photo), the cabochon cup is attached to one side of the bangle & the other side is left free. In other words you open this bangle at the top & it is held in place by the spring.
Diameter: 65mm x 45mm (not adjustable)
Width at widest part (cup): 18mm Width at narrowest part (bands): 11mm
Cup: 25mm x 18mm x 1.5mm
The surfaces of your cabochons and the bangle cup should preferably meet without gaps.
Glorias Dichroics strongly recommends the use of a high strength, waterproof, epoxy resin adhesive for glueing your chosen cabochons to the bangle cup. It is adviseable to roughen the surface of the bangle cup with sand paper before applying the adhesive to ensure good adhesion between your cabochons and the cup.
Copyright © Gloria Minshull 2008 All Rights Reserved

One -1- Silver Plated Removable Cup Bangle Blank

One (1) silver plated, removable cup, sprung, bangle blank with oval cabochon cup suitable for mounting all sorts of fun and decorative items including dichroic glass cabochons, buttons, typewriter keys, charms and fimo. A more delicate piece. The band is flat and not round as shown in the picture
Diameter: 65mm (this is sprung due to the shape of the metal and the removable cup)
Band Width: 3mm Band depth: 1.5mm
Cup: 18mm x 13mm x 1mm
The surfaces of your cabochons and the bangle cup should preferably meet without gaps.
Glorias Dichroics strongly recommends the use of a high strength, waterproof, epoxy resin adhesive for glueing your chosen cabochons to the bangle cup. It is advisable to roughen the surface of the bangle cup with sand paper before applying the adhesive to ensure good adhesion between your cabochons and the cup.
Copyright © Gloria Minshull 2008 All Rights Reserved

One -1- Gold Plated Open Offset Bangle Blank

One (1) gold plated, open ended and offset, bangle blank with full fixed oval cabochon cup suitable for mounting all sorts of fun and decorative items including dichroic glass cabochons, buttons, typewriter keys, charms and fimo.
Diameter: 60mm (this is adjustable as the metal is semi soft)
Band Width: 5mm Band depth: 5mm
Cup: 25mm x 18mm x 1.5mm
The surfaces of your cabochons and the bangle cup should preferably meet without gaps.
Glorias Dichroics strongly recommends the use of a high strength, waterproof, epoxy resin adhesive for glueing your chosen cabochons to the bangle cup. It is adviseable to roughen the surface of the bangle cup with sand paper before applying the adhesive to ensure good adhesion between your cabochons and the cup.
Copyright © Gloria Minshull 2008 All Rights Reserved

One -1- Silver Plated Open Offset Bangle Blank

One (1) silver plated, open ended and offset, bangle blank with full fixed oval cabochon cup suitable for mounting all sorts of fun and decorative items including dichroic glass cabochons, buttons, typewriter keys, charms and fimo.
Diameter: 60mm (this is adjustable as the metal is semi soft)
Band Width: 5mm Band depth: 5mm
Cup: 25mm x 18mm x 1.5mm
The surfaces of your cabochons and the bangle cup should preferably meet without gaps.
Glorias Dichroics strongly recommends the use of a high strength, waterproof, epoxy resin adhesive for glueing your chosen cabochons to the bangle cup. It is adviseable to roughen the surface of the bangle cup with sand paper before applying the adhesive to ensure good adhesion between your cabochons and the cup.
Copyright © Gloria Minshull 2008 All Rights Reserved

One -1- Gold Plated Double Bar Spring Loaded Bangle Blank

One (1) gold plated spring loaded double bar bangle blank with half fixed oval cabochon cup suitable for mounting all sorts of fun and decorative items including dichroic glass cabochons, buttons, typewriter keys, charms and fimo.
This bangle blank has a spring opening (you can see the spring mechanism at the bottom of the bracelet in the photo), the cabochon cup is attached to one side of the bangle & the other side is left free. In other words you open this bangle at the top & it is held in place by the spring.
Diameter: 65mm x 45mm (not adjustable)
Width at widest part (cup): 18mm Width at narrowest part (bands): 11mm
Cup: 25mm x 18mm x 1.5mm
The surfaces of your cabochons and the bangle cup should preferably meet without gaps.
Glorias Dichroics strongly recommends the use of a high strength, waterproof, epoxy resin adhesive for glueing your chosen cabochons to the bangle cup. It is adviseable to roughen the surface of the bangle cup with sand paper before applying the adhesive to ensure good adhesion between your cabochons and the cup.
Copyright © Gloria Minshull 2008 All Rights Reserved